Category Archives: Uncategorized

Now is the time to switch to secured connections via SSL. Howto for Apache 2.4

Since a couple of moths Google is using SSL as a ranking signal which means that the use of secured SSL connections will improve the ranking of your page in the Google Serp. Furthermore it will increase the trust in your project if you use SSL connections. Switching to SSL is has never been easier than now. Here a short step-by-step guide which is showing you how to make your website secure.

Step 1: Create your a private and public key

The first thing you have to do to get started with encrypting your website is getting creating a SSL key and a certification request file based on that key. Using Linux this step is very easy. Just execute the following tow commands.

openssl genrsa -out mykey.key 2048 
openssl req -new -key mykey.key -out mykey.csr -config req.conf

The directory where you execute the command has also to contain the following req.conf:

[ req ]
default_bits        = 2048
default_keyfile     = mykey.key
distinguished_name  = req_distinguished_name
req_extensions     = req_ext # The extentions to add to the self signed cert

[ req_distinguished_name ]
countryName           = US
countryName_default   = US
stateOrProvinceName   = Colorado
stateOrProvinceName_default = Colorado
localityName          = Denver
localityName_default  = Denver
organizationName          =
organizationName_default  =
commonName            =
commonName_max        = 64

[ req_ext ]
subjectAltName          = @alt_names

DNS.1   =
DNS.2   =

Important: The [ req_ext ] and [alt_names] sections are only needed if you want to issue a certificate which is valid for multiple domains. Otherwise you can just leave these tow sections out.
Step 2: Now we arrived at the time where you have to issue your SSL certificate. You can either do that for free or get a commercial certificate. The advantage of the latter solution is that these certificates are recognized by all common web-browsers while the free certificates still have some acceptance issues.

A a really good provider of free SSL certificates is The acceptance of these free SSL certificates will increase with the time so it is definitely worth considering this option. If you decide to get a non-free certificate you might have a look at or to get cheap ones.

The certificates are simply issued after you uploaded your CSR Request file you have created before. If you got your certificate the only thing missing is to correctly setup your Apache Webserver

Step 3: Configure your webserver to use the SSL Certificates
The easiest way to do is to use virtual hosts. Adding the following two configs to your webserver will do both enable SSL and also maintain the normal HTTP connection.

<VirtualHost *:443>

   <Directory "/var/www/html">
      Require all granted

    DocumentRoot /var/www/html
    SSLEngine On
    SSLCertificateFile /etc/httpd/conf.d/ssl.key/cert.crt
    SSLCertificateKeyFile /etc/httpd/conf.d/ssl.key/djvupdf.key
    SSLCACertificateFile /etc/httpd/conf.d/ssl.key/

<VirtualHost *:80>
    DocumentRoot /var/www/html

   <Directory "/var/www/html">
      Require all granted

The files cert.crt and will be provided by your certification authority after the transaction has been completed.

Step 4: Solving SEO issues and testing your SSL configuration
Now you are done already. Your server is reachable via secured connections now. You can test if your SSL configuration is up-to-date at the following site:

If you get an A+ to A- there you are completely fine.

In case you did not disable the normal HTTP connection to your server there is a little issue with duplicate content you should solve. Search engines do not like duplicate content therefore you should tell them which is the preferred version of your site. This can be done easily by including the so-called canonical tag to the header section of your pages and setting it to the https:// URL of the particular page. This will fix those issues. Make sure, that the URL is exact!

A example how this looks like is the following line. Make sure to put it in the head section:

<link rel="canonical" href="" />

Host WordPress using Apache 4.2

Want to host your own WordPress installation with a recent version of the apache webserver (e.g. apache 4.3). Here you find everything you need. If you have been upgrading from an older apache version there might be a little obstacle you have to get around but with the directory permissions which is already perfectly fixed in the code sample below. Setting up WordPress is really easy. Here all the steps needed:

1. Download WordPress from

2. Unpack the Zip Archive you just have downloaded and put it into the document root of your webserver

3. Create a virtual host for your new apache installation.

To create the virtual host you simply have to put the following code snippet into your httpd.conf. In the following example the blog has been unpacked in the directory /var/www/myblog

<VirtualHost *:80>
      DocumentRoot /var/www/mydailyhacks
      ServerAlias *
      <Directory "/var/www/mydailyhacks/">
            Require all granted
            Options FollowSymLinks
            AllowOverride Limit Options FileInfo
            DirectoryIndex index.php

Make sure that you use all the directory setting exactly as they show up here, otherwise you will run in trouble.

4. The last step before you can activate your blog is setting up a MySql data base which can be used by wordpress. This is a lot easier than it sounds. Assuming you are running linux you have to make sure that the mysql-server is installed. In Fedora, Centos etc. you can achieve this by typing

yum install mysql-server
/sbin/service mysqld start

5. Now you only have to set up a new user and (in the example for simplicity the root user is used) and create the database for your WordPress install.

mysqladmin -u root password 'mypassword'
mysql -u root -pmypassword

5. Just contact your virtual server now under the address you defined in step 3. The automatic setup interface for your new blog will show up. Enter wordpress at database name and also enter the username and password which have been defined before.

Thats it! Enjoy your new self-hosted blog!

PHP Multifile Uploader for PHP 5.4, 5.5

Have you been looking for a simple PHP Multifile uploader script? Since version 5.4 PHP brings all the features to implement this fairly easy. No add-ons like APC are needed anymore. The script presented here can be used for multi- and single file uploads. It is really easy to install and therefore ideal for everyone who does not want the to figure out the built-in features of PHP.

It consists of the following components:

  • A simple from with a submit button
  • A Ajax Progress bar which is showing the progress of the upload
  • A feature to add as many inputs for as many files as you want

The script has been tested in a wide range of use cases and therefore proven to be operating stable. Upload limits for filesize etc. can easily be added to in the php.ini. That is all you need to know about the script. This is how the interface looks like:

To install the script you simply have to copy the files: php-multi-file-upload-script.php progress-frame.php, style-progress.css and upload.php in the same directory of your server which supports PHP > 5.4. After that the script should already work and you can customize the layout for your needs.

A live demonstration of the script you find here

The source code is available for download also for free here. It comes as a zip archive:

In case PHP is not configured correctly for file uploads just have look at you php.ini file. There the following three parameters should be adapted to your requirements:

; File Uploads ;

; Whether to allow HTTP file uploads.
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).

; Maximum allowed size for uploaded files.
upload_max_filesize = 12M

Do not miss to set file_uploads to “On” otherwise PHP will winge. After you went through these steps the users of your website can enjoy fast and straight forward file uploads. Especially if larger uploads are required for your project your users will really enjoy the presence of this progress bar. Otherwise the might be to impatient to wait for the file upload having finished.

How to set up a Load Balancer with Apache in 5 Minutes

True, there are professional tools for Load Balancing like the HAP Proxy which are used by big enterprises in the web. However, for small-scale until medium scale users such a high end tool may be a bit of an overhead. Instead one could think of using the build-in load balancing features of the apache webserver. They are really easy to set up and full-fill basic requrirements. A simple setup looks like follows


<Proxy balancer://mycluster>
                # WebHead1
                BalancerMember http://node1:80/ route=1 loadfactor=4
                # WebHead2
                BalancerMember http://node2:80 route=2 loadfactor=6

               # Security "technically we aren't blocking
                # anyone but this the place to make those
                # chages
                Order Deny,Allow
                Deny from none
                Allow from all

                # Load Balancer Settings
                # We will be configuring a simple Round
                # Robin style load balancer.  This means
                # that all webheads take an equal share of
                # of the load.
                ProxyPreserveHost On
                ProxySet lbmethod=bybusyness
                #ProxySet lbmethod=byrequests
                ProxySet stickysession=ROUTEID

In this case the load balancer is thought to produce use sticky sessions which is achieved by a cookie. If you want to achive really persistent session you might think just setting the expiration date of your cookie far in the future. An example you can find here. The load-factor simply defines a weight for the particular node.

Header add Set-Cookie "ROUTEID=.%{BALANCER_WORKER_ROUTE}e; Expires=Tue, 15-Jan-2019 21:47:38 GMT; path=/" env=BALANCER_ROUTE_CHANGED

There are also other ways to implement stickyness for the Apache Load Balancer. You can find a good overview about them in the apache documentation:

That is everything you need to know to set up a load balancer using mod balancer and Apache. Hope that helps. Life can sometimes really be easy…

Freakingly Fast Online OCR with

Sitting on a ton of scanned documents which you want to digitalize but do not know how to do so? Sure, there are many free Online OCR Services around but most of them are either rather slow or have upload limitations which might be annoying. Recently three started a service which might may a difference since it does not bother about such obstacles.

At you can submit as may pages as you want. The result will be available fast and the usage is straight-forward. As output you can choose both plain text and PDF and also the handsome DjVu Format. This is pretty convenient. In terms of speed the Online OCR offered by this site also is more than compatible. You might be surprised how fast all this goes.
As output formats you can choose both plain text and PDF and also the handsome DjVu Format is supported. The DjVu format has the advantage that is way better compressed than usual PDFs and therefore can save you some disk space. The PDF output has the advantage that it maintains the original structure of the document and yet remains searchable. This especially is useful for documents which contain a lot of graphics. The document looks like it should but is searchable. Of course there is also a lot of expensive tools for optical character recognition but the question is if it is really worth spending a lot of money on such software in our times. The trend clearly goes towards free online services and tools. I would not wonder if in future expensive software will disappear from the market.

If you know any other services fill free to drop a comment here. Of those which have been tested here won the competition.

You can check it out here: OcrGeek – Free Online OCR

A Cool Dogecoin Donate button

If you are interested in the digital currency Dogecoin and looking for a cool Donate button for your website you might be interested in this:

It is rally easy to install and will  help you to get some tip with your page or blog.

PNG to JPG converter

Here a nice online converter for PNG to JPG which also works the other way round. Offers some more nice features like bunch conversion etc.


Nice audio converter for Ogg to Mp3

The following tool does nice audio conversion between the Ogg and the Mp3 format. It is an online converter and therefore a nice way to do the job is you need a fast solution:

Apache: Realative Link Problem using Rewrite Engine (mod_rewrite)

Using the Apache Rewrite Engine there might occour a problem with relative links if you are e.g. are jumping between directories or if you are using the the Rewrite Engine for an internal proxy. In the follwing example realtive links in the page will not work properly.

  <Directory "/documentroot/de">
  RewriteEngine on
  RewriteBase    /de/
  RewriteRule    ^/?  http://localhost/?language=de  [P]

There is a very easy solution to avoid this problem. You can define a base url tag in the header section of your HTML pages.

In the example above you have to include something like follows to the header section of all pages that do not work properly:

   <base href="http://localhost/">


That’s ist!

Apache: Convert URL parameter strings to directories for search engine friendly URLS

Imagine you have a URL like which looks pretty ugly. For Search Engine Optimization it would be nice to have a more search engine friendly URL like

Apache offers an easy way to hide the parameter string by the second URL format. However, internally the page still is treated like the first version of the URL but users and search engines will not notice the old URL format.

To implement the example from above you simply have to add the following lines to your httpd.conf .

In this example the directory en is forwarded internally to page.php?language=en. If the user enters he will see the content of without noticing the parameter string.

<Directory "/documentroot/en">

  Options Indexes FollowSymLinks

  AllowOverride All

   Order allow,deny
   Allow from all

  Options +FollowSymlinks
  RewriteEngine on

  RewriteCond %{REQUEST_URI} =/en/

  RewriteRule   ^/? page.php\?language\=en [PT]


In the line /documentroot/en you define the directory for which you want to apply the hack. It has to be the internal location at your server.

The line “RewriteCond %{REQUEST_URI} =/en/” tells Apache to apply the hack only if is requested. Other URLs in the directory like will not be touched.